Amerec AT Owner's Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 3
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
4209-38 06-30-10
page 3
AK and 3K Series with R30K Control Owners Manual
The Troubleshooting Guide below is meant as a general aid only. There are no user serviceable parts in the generator. All repairs should be performed by a qualified service
person. For additional assistance or the factory authorized service person nearest you call AMEREC's Service Department at 1-800-331-0349.
SYMPTOMS PROBABLE CAUSES ACTION TO BE TAKEN
Control "ON"
(Control Lighted)
No Steam
No water to Generator
or
Control circuit is faulty
or
Generator is faulty
1. Wait at least 10 minutes after turning on Control.
2. Verify that the water is on.
3. Verify that the Generator's drain valve is closed.
4. If the above 4 steps do not disclose the problem turn off the Generator's circuit breaker. Call AMEREC's Service Department.
Control "OFF"
(Control light off)
Unit still makes steam
Control circuit is faulty
or
Generator is faulty
1. Turn off circuit breaker.
2. Call AMEREC's Service Department.
Water runs out steam head Generator is faulty 1. Turn off circuit breaker.
2. Turn off water.
3. Call AMEREC's Service Department.
SECTION 3: TROUBLESHOOTING GUIDE
• For assistance or part orders please contact your local
AMEREC Dealer or call AMEREC at 1-800-331-0349. Please
help us serve you better by:
1. Identifying the problem by using the troubleshooting guide
in this manual.
2. Read number 12, the UL Rating Label to obtain your unit's
model and code number.
• When ordering parts please provide the number, description
and quantity needed. When ordering wire assemblies, please
describe the wires by color, location and/or their connection
points.
• Do not return any materials to AMEREC without first
contacting AMEREC for a Return Authorization Number.
Freight must be prepaid to AMEREC.
17683 128th Place NE, Building C
Woodinville, Washington 98072, USA
425-951-1120 Fax: 425-951-1130
NUMBER PART NAME DESCRIPTION
1 FRAME CHASSIS
2 TERMINAL POWER INPUT TERMINAL BLOCK
3 COVER FRONT WITH WD LABEL
4 COVER ELEMENT ACCESS
5 TANK TWO ELEMENTS
6 INSULATION BLANKET
7 BRACKET L BRACKET
8 NIPPLE DRAIN NIPPLE
9 TERMINAL OPTIONAL AUTO FLUSH TERMINAL BLOCK
11 CAP CAP, THREAD PROTECTOR
12 LABEL UL RATING
13 PROBE TRIPLE LEVEL
14 ELEMENT REPLACEMENT ELEMENT
15 VA LVE WATER INLET
16 CLAMP SELF-TIGHTENING
17 HOSE WATER
18 CLAMP AUGER
19 VALVE MANUAL DRAIN
20 GASKET ELEMENT
22 VALVE PRESSURE RELIEF
23 PCA P RINTED CIRCUIT AS SEM BLY, AK
24 LUG GROUND
28 BOLT 1/4-20 x 1/2"
29 WASHER 1/4" LOCK
33 CONTROL CONTROL HOUSING
34 CABLE CONTROL CABLE
35 CONTROL R30K
37 STEAM HEAD DISPERSION HEAD (NOT SHOWN)
38 PLACARD SAFETY (NOT SHOWN)
39 LABEL WIRE DIAGRAM
40 FUSES 15/100 SLO-BLO (NOT SHOWN)
1
28
12
4
43
29
15
24
23
2
16
7
8
22
19
5
18
17
20
14
6
13
3
39
33
44
21
34
9
35
36
11
50
13
35
Page view 2
1 2 3

Comments to this Manuals

No comments